PQM 200

  • ACCURACY

    0.05%

  • RESOLUTION

    24bit

  • SAMPLING

    124 kS/s

  • SAFETY

    CAT IV 600V

  • MODULAR SYSTEM

    up to 40 ch

  • DESKTOP or RACK-MOUNT

Alt Text

Hardware

State of the Art

COMPUTER-BASED POWER QUALITY MONITOR

The PQM-200 is a computer-based Power Quality Monitor with up to 48 input channels. It combine functionalities of a Power Quality Monitor, Disturbance Recorder, Power Fault Recorder, Transient Recorder, Phasor Measurement Unit (PMU) and high precision energy meter. The input modules are fully-isolated (isolation voltage 6kV) and provide a synchronized sampling rate of 144 kS/s per channel and 24 bit resolution. An Automatic Anti-Aliasing filter together with extremely low-noise ensures signal quality and signal processing.

Alt Text

Hybrid Data Storage

Even if connection is lost all data are stored locally and will be transferred after reconnection.

Data on demand

All data can be transferred continuously or just triggered on demand.

Remote Configuration

The instrument can be configured remotely or locally. Either option also can be disabled.

Remote Location

All data can be transferred via Ethernet and via a GSM connection.

4HV4LV

4 channel voltage input module 1600V

4 channel low voltage input module up to 10V (Clamp or Rogowski)

Optional: 1x CAN2.0B and 1x RS485 Interface

Optional: 8x Digital In and 2x Digital Out

4HV4LA

4 channel voltage input module 1600V DC

4 channel current input module up to 5A rms (max. 20A)

Optional: 1x CAN2.0B and 1x RS485 Interface

Optional: 8x Digital In and 2x Digital Out

4HV6LV

4 channel voltage module 1600V

6 channel low voltage input module up to 10V (Clamp or Rogowski)

4HV6LA

4 channel voltage input module 1600V DC

6 channel current input module up to 5A rms (max. 20A)

16DI16DO

16x Digital input and 16x Digital output

1x CAN2.0B, 1x RS485

Alt Text

SOFTWARE

PQM-SCADA is the enterprise management software for Power Quality Analysers.

PQM-SCADA

Power Quality Monitoring

Power Quality Monitors

  • Power Quality

    Class A with extended features

  • Disturbance

    1/2 Period storing & triggering

  • System Dynamics

    Resonances, Phase Angle Jumps, etc.

  • Transient Recording

    Waveform & Disturbance Trigger

  • Phasor Measurment Unit (PMU)

    Wide Area Monitoring System (WAMS)

  • RoCoF

    Rate of Change of Frequency

  • Energy Measurement

    Multi-Feeder

PQ SCADA Software

  • Visualisations

    Recorder, Waveform, FFT, Vector, Table, etc.

  • Report

    EN50160, IEEE519, IEC61000-2-4, etc.

  • Statistics

    for substations, areas, states

  • Maps

    Geographical Visualisation

  • Interfaces

    IEC61850/60870-5-104/Modbus

  • Redundancy

    local and centralised data storage

  • Remote Configuration

    and Supervision

Alt Text

Key Features

Alt Text

according to IEC 61000-4-30 Ed.3 and IEC 62586
Harmonics, Interharmonics and THD:
Class A
Higher Frequencies (200Hz band):
2 – 9 kHz
Symmetrical Components & Unbalance:
Class A ((Pos-, Neg- and Zero Sequence))
Flicker (PST, PLT, Pinst) and RVC:
Class A

.
Voltage Events:
Class A (dip, swell, interruption – time, extrema, length)
Frequency:
10 sec, AVE, MIN, MAX
Voltage, Current:
RMS, AVE, MIN, MAX, ½ Period-values, 200ms, 10s, 10min
Time Synchronisation:
Class A

Alt Text

Power Calculation:
P, Q, S, PF, cos phi, D, DH, QH
Frequency:
10 sec, AVE, MIN, MAX
Voltage, Current:
RMS, AVE, MIN, MAX, ½ Period-values, 200ms, 10s, 10min
Power Calculation:
P, Q, S, PF, cos phi, D, DH, QH

Energy:
Total, positive, negative (P, Q, P+, P-, Q+, Q-)
Efficiency:
DC / AC, U-I Curve for PV
Wiring:
DC, 1-Phase, 2-Phase, 3-Phase Star and Delta

Alt Text

MIN, MAX, RMS, AVE:
U, I, P, Q, S, f, PF, phi, THD, Harmonics, Interharm., Unbalance, etc.
ENVELOPE / WINDOW:
U, I
DELTA:
dU, dI, df, dP, etc.

DERIVATE (RATE OF CHANGE):
dU/dt, df/dt etc. … per ms, number of periods or half-period
VOLTAGE SIGNALLING:
Threshold
EN50160:
Trigger on any EN50160 parameter (Max, Quantil)

Alt Text

1/2 PERIOD TRIGGER:
U, I, P, Q, S, f, PF, phi, THD, Harmonics, Interharm., Unbalance, etc.
SYMMETRICAL COMPONENTS:
Positive-, Negative-, Zerosequence
Phasor Measurement Unit (PMU)
according to IEEE C37.118: Total Vector Error 0.01% (typ.), Angle Error 0.003°(typ)
RATE OF CHANGE FREQUENCY (ROCOF)

POWER QUALITY, HARMONICS, FLICKER:
IEC61000-4-30 Ed. 3 Class A / IEC61000-4-7 / IEC61000-4-15 / IEC62586-2 Ed. 2 / IEC62586-1
PUBLIC GRID, RAILWAY AND INDUSTRY
EN50160 / EN50163 / IEC61000-2-2 / IEC61000-2-4 (Class 1; 2; 3) / IEEE519 / IEEE 1159 / IEC61000-2-12 / NRS048
WIND POWER, RENEWABLES AND GRID CODES
IEC61400-21 / IEC61400-12 / FGW-TR3 / VDE N-4105 / VDE N-4100 / VDE N-4110 / D-A-CH-CZ / BDEW / ROCOF / IEEE C37.118-2005 (PMU)
MOTORS, TRANSFORMERS AND ELECTRICAL EQUIPMENT
IEC60034 / IEC 60076-1 / IEC61000-3-2 / IEC61000-3-3 / IEC61000-3-11 / IEC61000-3-12

APPLICATIONS

See all Applications of the NEO PQ Analyzers

Applications

Datasheet

English
Cookie Consent with Real Cookie Banner